Custom Vac Logo
904 29 Avenue Nisku, AB.

Hydro-Excavators


CV Line of Top Quality Vacuum Equipment

CV6400 (Unit not for TDG)

  • Tank Capacity 8 cubes (1816 US gal)
  • Water Compartment 5 Cubes (1320 US gal)
  • One 8' x 25' reach telescoping boom with 270 degree rotation
  • All valves are coded compliant full open hydraulic rear door
  • Hibon SIAV 822 blower 2650 CFM, 27 Hg max vacuum

Wash system 

  • Wash system c/w cat 3560 triplex plunger pump
  • Hotshot 120 volt heater 980,000 BTU/hr
  • Hydraulic hose reels
  • Degreaser system
  • All equipment enclosed inside an insulated, heated aluminum enclosure
  • Code rear bumper and national safety mark

Contact Sales

For more information about customization contact our sales representative.

Units Available

See our online listing of unit immediately available and in production.



Hydro-Excavator CV6400 (Unit not for TDG)


DESIGN: Vacuum debris tank shall withstand 14.9 PSI Internal Pressure and 15 PSI external Pressure (full vacuum)
UNIT NOT FOR TDG

Debris Compartment:

  • Tank diameter 78" x 8' seam to seam
  • Tank capacity 8 cubes
  • 78" x 5/16" heads
  • 78" x 5/16" shells
  • Formed tank pedestals
  • liquid level indicator D/S
  • 6" Load manual valve c/w 6" sandpipe, aluminum camlock/cap
  • 4" Load manual valve,
  • Hydraulic Lift rear gate mechanism.
  • All rear valves heated, and equipped with air/open- spring/close air actuators
  • Separate control switches

Water Compartment:

  • 5 Cubes (1100 Imp Gal)
  • 20" Manway
  • Stainless steel liquid level indicator with grab handle P/S
  • 2' heated fill port c/w riser/vent pipe
  • 2" heated Drain Valve c/w butterfly valve
  • 2" heated hard pipe supply line Plumbed through wash cabinet direct to Triplex Pump c/w loop hose at end and ball valve
  • 2" heated isolation valve between debris and water tank c/w control switch at operator station 

Vibrator:

  • Global hydraulic vibrator assembly mounted on bottom of tank with reinforcement pads, heavy duty mounting channel and pressure relief valve.

Pressure Relief:

  • One 3" x 15 psi relief located top front of debris tank
  • 2" vacuum breakers installed on exhaust silencer

Gauges:

  • Gauge assembly with tank vacuum/pressure gauge, hydraulic pressure gauges. 
  • Blower temperature gauge - remote mounted on D/S.

Blower Specifications:

  • 5 Cubes (1100 Imp Gal)
  • 20" Manway
  • Stainless steel liquid level indicator with grab handle P/S
  • 2' heated fill port c/w riser/vent pipe
  • 2" heated Drain Valve c/w butterfly valve
  • 2" heated hard pipe supply line Plumbed through wash cabinet direct to Triplex Pump c/w loop hose at end and ball valve
  • 2" heated isolation valve between debris and water tank c/w control switch at operator station   
  • Blower Drive:
  • Transfer case drive with air shift engagement mounted in truck driveline.
  • Driveline modifications as required

Primary Shut-Offs:

  • Dual heavy duty internal shut-offs with 12" S.S. float ball/cage assembly and 8" Neoprene seats.  
  • Dual 8" diameter flanged outlets.
  • Dual 8" isolation valves air actuated with switches at operator station

Plumbing:

  • 8" piping c/w 8" oil & gas loop hose
  • Filtration System:
  • Dual high efficiency cyclones mounted on D/S of unit with 20" diameter drop box assembly with side swing cleanout doors
  • 3" brass drain valves and aluminum camlok fittings.
  • Two 20" diameter washable inline S.S./fiber filter element, 20 micron rating for protection of blower.

Silencers:

  • One 12" exhaust silencer, One 12" cooling intake silencers in horizontal mount configuration

Hydraulic System (Linde-closed loop design):

  • 8 Bolt PTO
  • Hydraulic pump and motor for wash pump
  • Tandem gear pump for boom and auxiliary functions
  • Spool type valve control for pump and allied functions
  • Rear control bank for rear gate
  • 90 gallon oil tank c/w vent, site glass, filters, temperature gauge, and inspection hatch
  • 12 volt oil coolers
  • 3 stage hydraulic hoist cylinder

Hydraulic Boom:

  • One New Style 8" x 270 deg. telescopic suction boom mounted top rear of tank
  • 8" boom hose
  • One wireless remote control, functions include on/off for wash pump
  • Standard hard wire pendant control and plug (for back up)

 

Wash System:

  • Cat 3560 Triplex plunger pump rated 20gpm@ 4000 psi
  • 2" Y strainer, 1" high pressure Baird relief valve,
  • Three Hydraulic Rewind Reels
  • 100' x 1/2" pressure hose
  • 100' x 3/8 temperature rated Steam hose
  • Degreaser assembly c/w trigger gun, wand, nozzle, pump, degreaser hose

Wash Accessories:

  • One wash gun, wand, nozzle and quick coupler
  • One steam wand, nozzle and quick coupler
  • One 6' hydro exposing wand c/w 4' extension, high pressure ball
  • Valve and turbo nozzle

Hot Water System:

  • Hotshot 980,000 BTU/hr. heater c/e relief valves, temperature gauge Honeywell control and Diagnostic panel
  • Safety Feature: a 340 deg. Auto Shut-Off for heater system
  • New style 18 GPM solid brass flow switch with no bypass line
  • 3000 Watt Inverter
  • Wet Steam kit plumbed with high pressure ball valves

Wash Cabinet:

  • Milron 54" aluminum insulated cabinet c/w large door D/S
  •  Small access door in large door P/S for hose access
  • Two heaters, LED Lights, and Automatic Vent

Frame, Deck And Allied Equipment:

  • Full length sub frame c/w 1/8" checker plate hose tray/fender assembly
  • c/w heavy duty outrigger supports, 1-1/4" tube handrails, close in plate.
  • Standard rear bumper with light boxes and rear tire skirt
  • Sub frame supports decking, rear hoist hinges front hoist cradle

Cabinets:

  • One steel three door deck box
  • Two rear skirt fitting boxes

Electrical System:

  • Waterproof main circuit control box - self contained power supply.
  • Sealed wire harness c/w waterproof junction boxes.
  • L.E.D. lamps (Clearance, park, signal).
  • Sealed L.E.D. reverse lamps.
  • Four L.E.D. work lights
  • Three L.E.D.; lights on boom
  • Electrical system shut-down at key.
  • Sealed rear skirt lamp modules.
  • Stop and turn L.E.D sealed lamp modules on top ring of door.
  • Back up alarm.
  • Deck mount blower control switch

Other Items:

  • Catwalk & back rail (with safety tie off rings), on upper suction pipe driver's side.
  • PTO Hour meter installed in truck cab
  • Chain hanger, slide out style
  • Mud flaps
  • 50' ground cable ( wind up style )
  • 30# fire extinguisher/Brkt/Cover
  • Boom hose holders P/S
  • One 8" x 6" x 4' aluminum adapter/Band clamp ends
  • Two 6" x 6' Aluminum dig tubes/band clamp ends, One with neoprene tip
  • Dig tube holder

Other Items:

  • Operators manual
  • National Safety Mark
  • One Year Standard Manufactures Ltd Warranty

Paint:

  • The entire tank and body of vacuum system shall be sandblasted, primed and
  • painted with Endura paint

Installation:

  • Complete system installed on Tri-drive truck chassis
Hydro-Excavators

National and International Sales


Custom Vac Service Ltd. offers custom built industrial vacuum equipment manufactured at our modern facility located in Nisku Alberta. Custom Vac Service Ltd. has a large inventory of vacuum trucks in production, ready for pant and for immediate delivery as well as a large inventory of vacuum trucks for rent or lease. 

Custom Vac's offers top quality industrial vacuum equipment for local, national and international sales. Custom Vac Service Ltd. offers equipment for export to the United States, Mexico and South America and welcomes inquiries from international customers requiring high quality custom built vacuum trucks.

A representative is available to answer any questions you may have about renting, leasing or purchasing a Vacuum Truck.






24/7 Vacuum Truck Service Facilities

Transport Canada "Certified" ASME, ABSA Registered Facility

Parts - Service - Inspections - Sales - Rentals - Leasing

Tel. +1  780 955-9344


Tel. +1 (780) 955-9344 Fax. +1 (780) 955-9343
904 29 Avenue Nisku, AB. Canada T9E 1B7
Copyright (c) 2016 Custom Vac Services Ltd. Terms of Use l Privacy Policy